A NOISY GARAGE DOOR
A noisy garage door can keep you up at night, and sound generally unpleasant. Many garage door noises can be signs of problems with your garage door or worn parts. With anything that has moving components, some vibrations and rattling may be normal, but it should not be so loud it's annoying. Gladly, many times, the garage door does not need to be replaced, often times some lubrication or minor adjustments can make a big difference.
TIGHTEN ANY LOOSE PARTS
Anything loose on your garage doors will rattle. The nuts and bolts along the garage door track will make noise if they are too loose.
If you want to try to tighten them, first, locate them along the track along either side of the garage door. With your wrench, tighten any nuts and bolts that feel loose. Be careful not to overtighten. If you do so, you’ll risk stripping the lag screw holes, which will make the screws even looser, or drive the bolt heads straight through the garage doors.
If you’re not sure how tight is too tight, call a professional to help you adjust the nuts and bolts.
LUBRICATE MOVING PARTS
Wherever there’s metal-on-metal movement, it is essential to lubricate well and often. he areas you’ll need to hit are the rollers, hinges and springs.
Lubricate all areas of your garage door liberally and often but don't lubricate the tracks themselves. You may want to wear gloves to keep your hands clean when working with lubricant.
HOW TO LUBRICATE ROLLERS
The rollers are metal cylinders that connect each panel of your garage door to its track. If you have metal rollers, you can easily spray some petroleum garage door lubricant on these areas. After lubricating, make sure to wipe away any excess liquid.
Of course, nylon rollers won't be so loud nor do they need to be lubricated, if you would like to consider changing out your rollers, just give us a call!
HOW TO LUBRICATE HINGES
You will find hinges on each panel of your garage door. They allow the door to fold on its way up and down. Just like with a squeaky door, proper lubrication can help if you hear a creaking noise. As with the rollers, you’ll want to give the hinges a liberal helping of lubricant and wipe away any excess that drips off.
As you spray, check the hinges for any dust or metal filings, as this means the joints are wearing out. If the hinges are showing signs of wear, it is time to call a professional to replace them.
HOW TO LUBRICATE SPRINGS
Your garage door may have two different types of springs. One is called a torsion spring, which you will find just above your closed garage door. The other kind of spring will be on either side of the garage doors by the tracks. Both types require lubricant.
Since springs are a bit larger than hinges and rollers, use a piece of folded cardboard as a splash guard when lubricating them.
REPLACE ALL WORN PARTS
As you grease all the metal parts of your garage, be on the lookout for any pieces that look broken or worn. If you see any damaged parts, call an expert to replace these parts for you.
HOW TO SPOT A WORN-OUT ROLLER
A common sign of a worn-out roller is a squeaking or grinding sound. Many rollers have unsealed bearings that break down from years of use and contact with dirt. If your garage door seems to quake while moving, it’s a good indicator that you need new rollers.
Whenever you decide to replace a damaged roller, it’s a good idea to replace all of them at once. Usually, this means you’ll need to purchase 12 rollers. If you’re worried about noise, nylon rollers are your best bet. Nylon rollers are less noisy and require less maintenance. You’ll need to contact your garage door dealer or a professional installer to replace rollers.
HOW TO SPOT A WORN-OUT HINGE
While wear is less likely on hinges than on rollers, if you spot any metal dust around the hinges, they are deteriorating. If you see an unusual or oblong hole anywhere on your hinges, you need new ones.
Do not attempt to replace hinges by yourself. Incorrect hinge replacement might cause your garage door to fall, which could be dangerous to you and anyone around you.
If your garage door is unusually noisy, or not working at all, it might have a problem with the springs. If your garage door makes a loud sound, especially when it hits the ground, faulty springs are most likely the cause. Check your springs for rust and other damage. If you find any problems, contact an expert immediately.
Only a professional should handle work involving springs. The high tension in springs makes them very dangerous, and you should not attempt to work on or near the springs or counterbalance system.
Keep in mind, we have a garage door tune-up that costs only $49, it's a great value, and well worth it! Kingwood Garage Door, call a name you can trust!
No job too big and no job is too small. 832-641-0402